Tubular Steel Fence Specifications for Project Buyers
A tubular steel fence can look simple from a distance, but its performance and appearance depend on the dimensions behind the design. Buyers should agree on panel height and width, picket and rail arrangement, post section, finish, gates and installation detail before comparing offers. A drawing and component schedule make those choices visible.
Set the height and panel width
Weld Fence currently lists heights from 1.2 m to 2.4 m in several standard steps and panel widths from 1.5 m to 3.0 m. https://weldfence.com/steel-tubular-fencesThe right combination depends on the site plan, access requirements and local rules. Confirm whether the quoted height is the panel dimension or the finished height above ground. Long or tall panels may require a different post and foundation design; do not select them from appearance alone.
Define the steel components
The current product page lists several square post sizes, from 50 x 50 mm to 75 x 75 mm, and multiple rail sections, including 25 x 25 mm and 40 x 40 mm. It also lists wall thickness options and two-, three- and four-rail layouts. Those choices are a range, not a single default specification. Add picket size, spacing, top treatment, weld detail and gate frame to the drawing so a supplier can quote the same design as competitors.
Where safety rules limit openings or climbable features, the project designer should set the requirement explicitly. A decorative reference photo cannot substitute for a dimensioned drawing.
Specify corrosion protection and connections
The site describes galvanized steel with powder coating for tubular fencing. Confirm the exact production sequence and how welds, cut ends, posts, fasteners and gates are protected. Ask for a finish sample when color matters. State whether panels connect to posts by brackets, welding or another detail, and show the method on the drawing.
Compare complete installed systems
An inexpensive panel can become an expensive project if posts, gates, fittings or site labor were excluded. Request an itemized bill of materials and packaging list. Note the exposure environment, total run length, gate schedule and destination in the inquiry. https://weldfence.com/contact/The Weld Fence tubular fence page lists the available range; use it to build a project-specific request rather than treating every listed option as interchangeable.





