3D Fence Panel Sizes and Post Spacing | Weld Fence

125

The panel width printed on a catalog page is not automatically the distance between installed posts. Connections, post profile and installation tolerance all affect the set-out. For a long perimeter, small errors repeated across many bays can produce an awkward final opening. A simple layout drawing before production prevents that problem.https://weldfence.com/3d-fence/
Start with the available panel range
Weld Fence currently lists 3D panel heights of 1030, 1230, 1530, 1730 and 2030 mm and widths of 2000, 2500 and 3000 mm, with custom sizes available. The listed wire diameters are 3.5 to 5.0 mm in several steps. These catalog dimensions should be checked against the current shop drawing and the chosen post-and-clamp system before being copied into a purchase order.
A nominal 2 m fence needs a clear definition: is 2 m the panel height, finished height above ground, or a project target including a ground gap? The existing Weld Fence article on 2 m high 3D fencing discusses that configuration; the final drawing should resolve the measurement.
Set out post centers from the connection detail
First identify the exact panel width and the required engagement at each post. Then obtain the manufacturer’s recommended post-center dimension for the selected clips and post. Do not calculate centers from panel width alone. Show the first and last bay, corners, gates, changes in level and any shortened panels on the layout plan.https://weldfence.com/2m-high-3d-fence-manufacturer-galvanized-and-powder-coated-welded-mesh-fencing/
For sloping ground, decide whether panels will step or follow the grade. Stepping can leave varying bottom gaps; following a grade may require a different panel or custom fabrication. Resolve this before selecting a standard bay count.
Count complete bays and components
Divide each straight run into planned bays only after allowing for gates, corner posts and termination details. Count posts by function, not by multiplying a generic post-per-panel ratio. A gate opening needs its own posts and hardware. Confirm clips, bolts, caps and spare quantities in the bill of materials. This also helps the installer check delivered goods before work begins.
Send a layout that can be quoted
A useful inquiry includes a dimensioned site plan, required finished height, ground profile, gate schedule, intended installation method, coating and destination. Ask the supplier to return a panel schedule, post-center recommendation and connection drawing. Use the 3D product page for the available range and the existing 2 m article for a common height example; neither replaces the project drawing.

Scroll to Top